The large 3-axis gyroscope system for all RC-surface models
The proven WINGSTABI technology for high demands with 12 servo outputs and an integrated battery switch 35 A output current.
The integrated receiver solution for MULTIPLEX M-LINK users, we offer the latest state of the RX-DR pro M-LINK technology. This innovative technology packaged in a designer housing use made of anodized aircraft aluminum.
The extended WINGSTABI software 1.2.8 allows:
New flap control: up to 6 flaps wings and spoilers
model templates for most MPX models - very comfortable!
Servo Match function
New mixer and control settings
Many improvements in ease of use
Features:
3-axis gyro system (MEMS) for all surface models
12 servo outputs
for each servo function is freely assignable to fit into every model application
Power Match Function: Assigning a function multiple servos with individual servo ways
complete any position
from WingStabi makes - any simple remote control, a Freiprogramierung high end RC system
Programmable via PC and APP (smartphone and tablet on Android based)
4 flight phases: 1. Off / second stabilization for flying in the wind / 3rd aerobatics and 3D flight / 4. torquing
Natural & realistic flight feeling despite full stabilization
despite extreme control, the model does not feel like a robot
sensitivity of the 3-axis adjustable separately or in common via the transmitter.
MEMS sensors of the latest generation
Delta mixer & V-tail mixer & boot support
Real-time sensor diagram in the PC software
Design anodized aircraft aluminum with integrated cooling fins and screw eyes
via external switch controllable (on / off). Mechanical switch and magnetic switch from the MPX range
strain relief / vibration protection for the battery connector
for all common RC systems (Graupner, Futaba, Spectrum, M-Link, Jeti, HiTEC, JR, Weantronic)
Integrated Battery switch with 35 A output current
In WingStabi with receiver saves space, weight and money. Minimizes error sources and brings security
integrated with M-Link has all the features of MULTIPLEX DR-pro receiver, including telemetry..
HOLD / FAIL-SAFE function
Telemetry / Feedback channel capability
Integral sensor interface for connecting external sensor modules (max. 16)
Integral error counter / data logger
voltage and signal errors indicated by separate LEDs
Integrated PC interface
Thanks to the latest MEMS sensors the feeling of flight is very realistic, even with extreme control.
battery switch
The WingStabi Pro can be supplied directly, or through suitable voltage regulator or BECs by up to two batteries. The extremely high performance potential of the WingStabi Pro assumes the batteries or BEC to be used with appropriate capacity. The continuous output is 35A, the peak power, however, is many times higher. The power supply (max. Two batteries ...) is connected with the MPX plugs directly to the Wingstabi Pro. In use, the battery / MPX connection with the higher voltage is always loaded. If both voltages exactly the same, both ports are equally loaded. Both ports operate separately from each other, so it is possible types of batteries / power supplies to use a different capacity, number of cells, type. If only one battery / connection used this can be connected to BATT1 or BATT2. The integrated safety clips to the battery terminals provide a vibration-proof connection of the MPX plug.
The MULTIPLEX WINGSTABI is designed and built in Germany. Quality Made in Germany!
What’s in the Box?:
1x WINGSTABI RX-12-DR pro M-LINK
4x Dämpfungstülle with screw and tubular rivets, for fixing the model
1x USB cable
1x manual
1x bow sticker Wingstabi