Prolux 60 Watt Soldering Iron W/Stand, Uk 3-Pin

The Prolux 60 Watt Soldering Iron (Part No: PX1351AGB) is a high-output, hobby-grade soldering tool designed for heavy-duty RC applications. With a 60W heating element, this iron provides the thermal mass necessary to tackle large connectors and high-gauge wiring that smaller 15W or 30W irons struggle to melt. The "GB" suffix indicates it is fitted with a standard UK 3-pin plug for 230V operation.

Key Features:

• High 60W Output: Specifically designed for the thick wires and large connectors common in RC, such as XT60/XT90, Deans (T-Plug), and 4mm/5mm bullet connectors.
• Fast Heat Recovery: The 60W element allows the tip to recover temperature quickly between joints, preventing "cold solder joints" that can fail under high-vibration RC conditions.
• Long-Life Plated Tip: Features a high-quality, pre-tinned tip designed to resist oxidation and maintain excellent heat transfer for precise soldering.
• Safety Stand Included: Comes with a metal wire stand to safely support the iron on your workbench, keeping the hot tip away from tools and surfaces.
• Ergonomic Grip: Designed with a heat-resistant handle and a slim profile to provide the control needed for delicate PCB work while still being robust enough for power leads.

Technical Specifications:

Soldering Tip:

When soldering large connectors like XT60s, the 60W iron is very efficient, but it can also melt the plastic housing if held too long. Pro-Tip: Plug a "mate" connector into the one you are soldering; this acts as a heat sink and helps the pins stay perfectly aligned even if the plastic softens slightly. Always keep the tip "wet" with a small amount of solder to prevent oxidation.

Maintenance Note: Never use a file to clean the tip, as this will destroy the plating. Instead, use a damp sponge or a brass wire tip cleaner while the iron is hot.