PROLINE PRO-MT 4X4 REPLACEMENT SHOCK TOWERS For RC Car

The Pro-Line PRO-MT 4x4 Replacement Shock Towers (Part No: PL4005-04) is a genuine factory replacement set for the shock mounting system on the 1/10 scale PRO-MT 4x4 and PRO-Fusion SC 4x4. This kit provides both the front and rear towers, ensuring your suspension geometry remains precise and capable of handling the extreme 4S brushless power these vehicles are known for.

Key Features:

• Complete Set: Includes both the Front and Rear shock towers in a single package, allowing for a total refresh of your shock mounting points.
• High-Strength Composite: Molded from Pro-Line's "Basher-Proof" high-strength plastic, designed to flex slightly under massive impacts to prevent snapping while remaining stiff enough for precise handling.
• Direct Factory Fit: These are the exact parts included in the original PRO-MT 4x4 kit, guaranteeing perfect alignment with the bulkheads and shock standoffs.
• Reinforced Geometry: Feature ribbed reinforcement at high-stress areas to minimize tower twist during heavy cornering or off-center landings.
• Multiple Mounting Holes: Includes the standard tuning positions for the upper shock mounts, allowing you to adjust the shock angle to change the progressive feel of your suspension.

Technical Specifications:

Installation Tip:

When replacing these towers, take the opportunity to inspect your Shock Standoffs (PL4005-13). If the towers have taken a hit hard enough to crack, the metal standoffs may be slightly bent, which will cause the shocks to bind. Pro-Tip: Do not over-tighten the screws into the plastic bulkheads; snug them down until they stop, then add an extra 1/8th turn to ensure a secure hold without stripping the composite material.