Ikonnik 3-Channel 2.4GHz Krypton (Kr) All Weather Receiver

The Ikonnik 3-Channel 2.4GHz Krypton (Kr) All Weather Receiver (Part No: KNNS0032) is a durable, versatile receiver designed for hobbyists who don't let the weather stop their drive. Operating on the Krypton (Kr) protocol, this receiver is a staple for Helion and other mid-scale RC vehicles, offering a robust "All Weather" build that protects internal circuitry against splashes and humidity.

Key Features:

• Krypton (Kr) Protocol: Uses Ikonnik’s reliable 2.4GHz Krypton frequency-hopping technology, providing a solid connection with low latency and excellent range.
• All-Weather Protection: Features a conformal-coated internal board to resist moisture, making it ideal for running through puddles, damp grass, or light snow.
• Integrated Failsafe: Includes a built-in failsafe function that can be programmed to return the throttle to a neutral position in the event of a signal loss, protecting your vehicle from "runaways."
• 3-Channel Versatility: Standard 3-channel configuration (Steering, Throttle, and Aux) to accommodate various vehicle setups or simple LED light kits.
• Broad Compatibility: Primarily designed for use with Ikonnik Krypton transmitters, such as those included with the Helion Dominus, Invictus, and Conquest series.

Technical Specifications:

Binding and Failsafe Setup:

To link the KNNS0032, insert the bind plug (if provided) or hold the bind button while powering on the receiver. The LED will flash rapidly. Turn on your Krypton transmitter in bind mode; once the LED stays solid, the link is established. Pro-Tip: Always set your failsafe! With the transmitter and receiver linked and the transmitter at neutral, press the button on the receiver briefly to store the "Safe" position. Always test the failsafe by turning off the transmitter (while the car is on a stand) to ensure the wheels don't spin.

Warning: While labeled "All Weather," this receiver is water-resistant, not fully waterproof. It should not be fully submerged. If it gets soaked, it is best to dry it out thoroughly before the next run to prevent corrosion.