Hobbywing Upgrade Capacitors Module C (Xd10/XRD10 Pro)

The Hobbywing Upgrade Capacitors Module C (HW30840011) is the premium "Upgrade" version of the standard Module C cap pack. Specifically tuned for the XeRun XD10 Pro and XR10 Pro, this module features a significant capacity boost over the standard version (HW30840009). By utilizing three 1000µF capacitors, it provides a total of 3000µF, offering superior ripple current endurance and "punch" for high-load competition environments like Modified touring car racing or high-angle drifting.

Key Features:

• Upgraded Capacity: Features 3000µF total capacitance (3 x 1000µF), providing a larger energy buffer than the standard 1680µF Module C (3 x 560µF).
• Ultra-Low Internal Resistance: Boasts an extremely low impedance of 0.002Ω, allowing for nearly instantaneous power delivery when the motor demands a burst of current.
• Extreme Ripple Endurance: Rated for a 24A ripple current, it effectively filters out electrical "noise" and voltage spikes that can overheat the ESC's internal MOSFETs.
• Improved Throttle Response: By stabilizing the voltage at the ESC input, it ensures more consistent motor timing and prevents "voltage sag" during aggressive acceleration.
• Interference Reduction: The high-quality capacitors significantly reduce RF interference, helping to maintain a cleaner signal for your receiver and gyro.

Technical Specifications:

Comparison Note:

While the Standard Module C (HW30840009) uses 20V capacitors (560µF each), this Upgrade Module C (HW30840011) uses 16V capacitors (1000µF each). This shift allows for the massive increase in capacitance within a similar physical size. However, it is strictly limited to 2S LiPo setups. Do not use this module on 3S or higher voltage systems, as it will exceed the 16V safety rating of the individual capacitors.