Hobbywing Electronic Power Switch - Bluetooth (Max6 G2)

The Hobbywing Electronic Power Switch - Bluetooth (Part No: HW30850029) is an innovative, high-tech replacement part specifically designed for the EZRUN MAX6 G2 and MAX8 G2S ESCs. Unlike standard electronic switches, this unit has a Bluetooth module integrated directly into the switch housing. This eliminates the need for an external OTA Programmer or WiFi module, allowing you to tune your ESC and view live data straight from your smartphone.

Key Features:

• Built-in Bluetooth Module: The switch acts as the wireless gateway. By simply powering on your vehicle, you can connect to the HW Link V2 app to adjust parameters, upgrade firmware, and check data logs.
• Data Logging Support: When paired with the MAX6 G2, this switch allows you to review real-time and historical data (RPM, voltage, temperature, throttle) directly on your phone after a run.
• Solid-State Durability: As an electronic switch, it has no moving internal contacts to wear out or vibrate loose, providing a much higher level of reliability for 1/6 and 1/8 scale bashers.
• IP67 Waterproofing: Fully sealed to handle the extreme conditions that the MAX6 G2 is famous for, including mud, snow, and water.
• Integrated Set Button: Includes the physical button needed for manual throttle calibration and basic ESC resets without needing the app.

Technical Specifications:

Pro-Tip: Bluetooth Reset Procedure

If you forget your Bluetooth password or cannot find the device in the app, you can perform a hardware reset using the switch. With the ESC connected to a battery but powered OFF, press and hold the power button for 8 seconds. The red LED will flash, then both red and green LEDs will light up, indicating the Bluetooth name and password have been restored to factory defaults (Name: HW_BLE**** / Pass: 888888).