EUR - Euro
PLN - Polish Zloty
SEK - Swedish Krona
USD - US Dollar
You have no items in your shopping cart.
Description
Details
Features
100A WP-MAX10-SCT-100A-3S RTR Sensorless with T-Plug (powered by HobbyWing).
Water-Proof and Dust-Proof for All Weather.
Super Internal Switch-Mode BEC with 6V / 7.4V for Usage with High Voltage Servo.
Built-In Capacitor Module.
Automatic Throttle Range Calibration.
Low Voltage Cut-Off Protection for Li-Po and NiMH Battery.
Over-Heat Protection and Throttle Signal Loss Protection.
5 Levels of acceleration/punch.
9 Levels of maximum brake force.
CEN Racing High Performance 3658 3000KV Brushless Motor (Sensorless).
Savox 12Kg Metal Gear Steering Servo
AMP-30 TX 3-Channel Transmitter.
Digital Trimming.
Steering Dual-Rate (ST D/R) Adjustment.
End Point Adjustment (EPA).
Build in Failsafe
Official Licensed 2023 M-Sport Ford Puma Rally 1 Edition
3mm Aluminium Chassis
Front and Rear 3mm Aluminium Shock Towers
Aluminium Arm Brace
Full Precision Ball Bearing Support
Wider Body Mount Positions for Better Support
Front Skid plate with Durable Foam Bumper
Easy Access Battery Tray
Battery Tray Size 142mm x 48mm
Aerodynamic Lower Arm Suspension Design
Big Bore Oil Filled Adjustable Coil Over Shocks
12mm Over Size Shock Body with 3mm Hardened Steel Polished Shaft
Full Time 4-Wheels Drive
Center Shaft Drivetrain for more power transferred to the wheels
Metal Transmission Gears
Aluminium Adjustable Motor Mount
Oil Filled Two Differential Drive System
Center Direct Drive
6 Gear Bevel Gear Type Differential
Front / Rear Harden Steel Dog Bone and outdrives
SpecificationLength 20 inches (510mm)
Width 9.5 inches (240mm)
Wheelbase: 11.80 inches (300mm)
Ground Clearance: 0.98 inches (25mm)
Weight: 5.51 lb. 2.5kg
Requires4 x AA Batteries for Transmitter
2-3S LiPo or 6-9 Cell NiMh Battery & Charger.
Specification
Requires
Details
Additional Information
| Part Number | CEN8999 |
|---|---|
| Manufacturer | CEN |
| Model Build | Ready Built |
| Power | Electric Brushless |
| Vehicle Type | Drift |
| Drive | 4WD |
| Scale | 1:8 |
| Length (mm) | 510 |
| Requires | 4 x AA Batteries for Transmitter. 2-3S LiPo or 6-9 Cell NiMh Battery & charger. |
