Dynam Detrum Istone Pro 6 Axis Aircraft Gyro Stabilizer & Auto Recovery System

Dynam
Part Number: DTM-G002

Availability: Out of stock

£36.99
Notify me when product is back in stock

Description

Details

The ISTONE-A PRO is a 6-axis Gyro & Stabilizer for aircraft use and is ideal for beginners or even advanced pilots. It is fully programmable and is suitable for normal wing, flying-wing, and V-tail airplanes. It connects to the receiver to control the aileron, elevator and rudder functions. It allows Gyro Off, Normal, Aerobatic, and Auto-Balance Safe modes and can be controlled from a switched channel on the transmitter. Compatible with S.BUS and PWM receivers, you can set the programmable elements via the SET button and LEDs.

Compact and easy to install, the ISTONE-A PRO incorporates an Auto-Balance Safe (ABS) mode. Also known as one-click rescue, when switched to Safe Mode from any other mode in an emergency, the airplane will recover to level flight automatically. This mode is suitable for beginners or even FPV (First Person View) applications.

Features:
  • 32-bit high-performance ARM MCU, 6-axis sensor chipset
  • Original attitude stabilization and control algorithms
  • Supports normal wing, flying wing, and V-tail airplanes
  • Supports mode switch via MODE channel - can switch between different modes
  • Four flight modes: Gyro Off Mode, Normal Mode, Aerobatic Mode, and Auto-Balance Safe Mode
  • Program via SET button and LEDs, adjust the gain for aileron, elevator, and rudder via three potentiometers
  • Supports S.BUS and PWM receivers
  • Small dimensions, supporting different mounting directions (face up, down, left, and right)
  • You can switch to Auto-Balance Safe (ABS) Mode when the aircraft is unstable or if you are losing control
  • Specification Check:

  • Main Controller: 32-bit MCU
  • Sensor: 6-axis gyro
  • Gyro Scale Range: -2000dps ~ +2000dps
  • Accelerometer Scale Range: -4g ~ +4g
  • Input Signal: PWM, S.BUS
  • Output Signal: PWM (71.4Hz)
  • Input Voltage: 4.8V ~ 7.4V
  • Operating Temp: -20? ~ 70?
  • Size: 36.5mm*29.4mm*12.4mm
  • Weight: 11g
  • What's Included:

  • ISTONE-A ACRO Gyro & Stabilizer ×1
  • 3-signal cable ×1
  • Anti-shock double sided tape ×2
  • Single-signal cable ×1
  • Details

    Additional Information

    Part Number DTM-G002
    Manufacturer Dynam

    Video



    There is no video for this product.

    Reviews

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register