Details
A high specification digital multi-charger that will meet the needs of most modellers. Charges and discharges all of the main types of batteries on the market.
Features:
Super function 5 in 1,16-bit microchip CPU controller
Built-in system temperature detection protection with optional battery temperature sensor (Item no.2714)
11 - 18 Volt DC input only. Under 11 V, it will stop working
Built-in Li-Po / LiFePo balance charging
Automatic accidental battery inversion detection and reverse input protection
Memory function for charging and discharging parameters
All-aluminum streamline casing design - tough, compact and portable
Large two-line, 16 characters dot matrix LCD display
Standard JST XH Connectors for balance charging
Banana plug connectors for convenience
10 tone selectable beep function with volume control
Built-in DC cooling fan
Specification:
Input: DC 11-18V
Battery Type: Ni-Cd / Ni-MH / Li-Po / LiFePo / Pb
Battery Cell: Ni-Cd / Ni-MH : 1-14 Cell packs (1.2-16.8V) Li-Po : 1-6 Cell packs (3.7 -22.2V) LiFePo : 1-6 Cell packs (3.2-19.2V) Pb : 2V, 6V, 12V
Charge Rate: 0.1A - 5.0A (0.1A Per gradation)
Discharge Rate: 0.1A - 2.0A (0.1A Per gradation)
Charging Capacity : 1- 9900mAH
Safety Timer : 10 - 720 mins or OFF
Trickle Charge Rate : 0.05 - 0.2A or OFF
Peak Sensitivity (- delta V) : 0 - 15mV